| Siemens Servo 300 Ventilator | |||
Basic Description | |||
| Manufacturer: | MAQUET GmbH & Co. KG | ||
| Ventilator Type: | Positive Pressure Invasive Conventional | ||
| Ventilator Class: | Intensive Care Unit (ICU) Transport CPAP | ||
| Patient Population Range: | Neonatal Pediatric Adult | ||
Description | |||
| Features: | Customizable respiratory patterns, supported and controlled ventilation modes, easy setup using context-sensitive controls, automatic emergency battery backup. | ||
| Brief Description: | Go Beyond the Static Specs! Click Here For Special Online Interactive Content! (Requires Flash Player 5.0) | ||
Characteristics | |||
| Modes--Invasive: | Pressure-controlled modes --- PRESSURE CONTROL, PRESSURE SUPPORT, SIMV (PRESSURE CONTROL) + PRESSURE SUPPORT, PRESSURE REGULATED VOLUME CONTROL, VOLUME SUPPORT, CPAP Flow-controlled modes --- VOLUME CONTROL; SIMV (VOLUME CONTROL) + PRESSSURE SUPPPORT | ||
| Waveforms: | Pressure: Rectangular, Adjustable Slope; Flow: Rectangular, Adjustable Slope | ||
| Operating Range of Controls: | Trigger Sensitivity Level: Pressure: (0 to 20 cmH2O below PEEP); Flow: adult: 0.6 - 2.0 L/min, pediatric: 0.3 - 1.0 L/min, neonate: 0.15 - 0.5 L/min; CMV Frequency: 5 to 150 breaths/min; SIMV Frequency: 0.5 to 40 breaths/min; Pressure Control Level Above PEEP: 0 to 100 cmH2O; Pressure Support Level Above PEEP: 0 to 100 cmH2O; Pause Time: 0% to 30%; Minute Volume: 0.2 to 60 L/min; Inspiratory Time: 10% to 80% of the ventilatory period; Baseline Pressure: 0 to 50 cmH2O | ||
| Triggering: | Pressure, flow, time, manual | ||
| Graphic Display: | Red Digital Display; | ||
| Power: | AC 110V/60Hz | ||
| Other Characteristics: | Also monitors I:E ratio | ||
Specifications | |||
| Front Panel Controls: | Patient type (adult, pediatric, neonate); Mode of ventilation; Pressure or flow triggering; Pressure limit; Baseline pressure; Minute volume; Ventilator frequency; Start breath; Pause hold; Inspiratory time (%); Inspiratory pause time (%); Rise time of inspiratory pressure; FIO2; Deliver preset group of 100% oxygen breaths | ||
| Power Requirements: | Electrical power: 115 VAC, 60 Hz; Pneumatic power: Air and oxygen at 29 to 100 psig | ||
| Alarm Controls: | Airway pressure: Pressure > upper pressure limit or set PEEP level plus 15 cmH2O for more than 15 seconds; O2 concentration: FlO2 above or below 6% of the set alarm value or if the oxygen fuel cell is not connected; Exp minute volume alarm: minute volume > set value or < 0.3 L/min for adults and children or 0.06 L/min for neonates. | ||
| Non-Adjustable Alarms: | Battery: main electric power has failed and the ventilator has switched to battery backup; Gas Supply: gas pressure < 29 psig or > than 94 psig; Technical: a wide variety of technical problems, most of which require technical service; Apnea: time between breaths > 10 seconds for adults, 15 seconds for children, or 20 seconds for neonates | ||
| Other Specifications: | 30 minute battery duration. Alarms classified by urgency. | ||
Monitored Variables : | |||
| Pressure | peak, mean, pause, baseline, and an analog bar graph of instantaneous airway pressure | ||
| Respiratory Rate | |||
| Tidal Volume | inspired and expired | ||
| Minute Volume | |||
Related Info | |||