| Hamilton ARABELLA Active Nasal CPAP System | |||
Basic Description | |||
| Manufacturer: | Hamilton Medical AG | ||
| Ventilator Type: | Positive Pressure Invasive Conventional | ||
| Ventilator Class: | Intensive Care Unit (ICU) Subacute CPAP | ||
| Patient Population Range: | Neonatal | ||
Characteristics | |||
| Operating Range of Controls: | Flow 0 to 10 l/min; Oxygen 21 to 100 %; Monitoring; NCPAP 0 to 12 cmH2O; Oxygen 21 to 100% | ||
| Size: | 21.4 x 17.5 x 14.5 cm (8.4 x 6.9 x 5.7 in.) | ||
| Weight: | 7.1kg (15.6 lbs) | ||
Characteristics (Non - Technical) | |||
| Approvals: | IEC 60601-1/ EN60601-1 IEC 60601-1-2/ EN60601-1-2, CE | ||
| Other Comments: | Formerly known as the ALADDIN II | ||
Specifications | |||
| Power Requirements: | Electrical power: 110 to 240 VAC, 50/60 Hz, 22VA; Air/oxygen supplies: 207 to 510 kP a (2 to 5 bar, 30 to 75 psi) | ||
| Alarms: | High pressure: 3 cmH2O above set NCPAP level; Low pressure: 2 cmH2O below set NCPAP level; High and low Oxygen: +/-5% of set Oxygen level; Alarm-silence button: 3min alarm silence; Internal pop-off valve: 150 cm H2O; Safety limit valve and alarm (reinitiates gas flow after 3s): terminates flow if pressure exceeds 11mbar; Gas supply: Pressure difference between air and oxygen is > 200kPa (2 bar, 29 psi) | ||
| Other Specifications: | Operating Temperature: 10 to 40 C at 0 to 75 reIH, noncondensing; Storage Temperature: -10 to 60 C at 0 to 75 reIH, noncondensing; Atmospheric Pressure: 700 to 1060 hP a (10 to 15 psi) | ||
Related Info | |||